This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?
CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Sony DV: DV NTSC 16:9 on a Plasma monitor
This Forum is for: Sony DV

Return to Posts Index Recommend: 3   RECOMMEND
FROM: AlexFahl
SUBJECT: DV NTSC 16:9 on a Plasma monitor
KEYWORDS:
I am starting a project using the Sony HVRZ1 in DV-NTSC 16:9 mode. Unfortunately I can't work in HD this time because of my limited time and facilities - My Problem: I made a testshoot and reviewed it directly from the DV Cam on a new professional Pioneer 42inch plasma monitor. The result is rather demotivating as the picture has horizontal stripe artifacts that are subtle but not acceptable in the end. Now I wonder if shooting on DV-NTSC aiming at showing the footage on 42inch plasma monitors makes sense. Am I doing something wrong, or is it just the rather low quality of the DV-NTSC codec?