This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message:





   Please click one time only

@ Copyright, 2010 Digital Media Online, All Rights Reserved
Content-type: text/html Ulead MediaStudio: MSP 7.3 capturing DVD crashes program
This Forum is for: Ulead MediaStudio

Return to Posts Index Recommend: 1   RECOMMEND
FROM: John Lenihan
SUBJECT: MSP 7.3 capturing DVD crashes program
KEYWORDS:

A friend gave me a DVD from his camcorder and I tried to capture the video by using the -VR capture mode of the capture software of MSP 7.3. It shows me the preview chapters but when I choose one to capture, MSP crashes.

Ulead support says that the -VR capture mode only works for Ulead created DVDs. Sure enough, if I create a DVD with MSP, I can capture it properly.

Can this be for real? What am I missing? And if it can't capture other DVDs created, the program shouldn't just crash.

Has anyone seen this and hopefully a work around?

 

John Lenihan


CURRENT THREAD: Read whole thread

Check if you would like to receive notice when your post has been responded to.
Note: This requires your email address to be correctly filled in. Your email address will not be displayed on the posts.
Post A Comment On DMNForums Comment on your Facebook page
The Subject of Your Post:
The Keywords of Your Post:
Your Post's Message: